12.2. Setting of doctor mode
1. Switch to CD mode. (Ensure no disc is inserted)
2. To enter Doctor mode, press and hold [TAPE/CD STOPn] key at the main unit, followed by [4] & [7] on remote control.
3. When the Doctor Mode is activated the LCD display will show the
version number (base 10) and EEPROM's checksum (base 16) will be displayed for 1 sec. After displaying the EEPROM
information for 1 sec, the display will return to the normal Doctor mode display
Figure 12-2
symbol at the 5
31
th
digit. At the same time, the micro-p
RX-ES29EE