Appendices
Please note that
damage resulting from
incorrect installation
will invalidate the war-
ranty.
Warning:
1. If you buy the ceiling
mount from other com-
pany, please ensure
that there is at least
10cm distance between
the bottom cover of
the projector and the
ceiling.
2. Avoid placing the
projector near sources
of heat such air-con-
ditioning units and
heaters otherwise it
may overheat and shut
down automatically.
3. Ceiling mounting
shall be mounting on
metal or concrete.
42
Ceiling Mount Installation
1. To prevent damaging your projector, please use the ceil-
ing mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the projec-
tor met the following specifi cations:
Screw type: M3
Maximum screw length: 10mm
Minimum screw length: 7.5mm
15.6
79.50
1.00
67.08
347.3