Chapter 3 Configuration - Using Ap Manager; Access Point Manager (Ap Manager); Install Access Point Manager - Gigabyte AirCruiser MIMO GN-AP03GM User Manual

Table of Contents

GN-AP03GM AirCruiser MIMO Access Point

There are two methods of setting up the AP: Using the web-based configuration,

or using Gigabyte's AP Manager Utility. AP Manager is only used for Gigabyte

Access Points. This Chapter will introduce how to set up APs through AP

Manager.

Note: 1. Setting up the AP may be done wirelessly or with a wired connection,

however we will assume you are using a wired connection for initial

setup.

2. You are also suggested to disable any firewall before setting up the

Wireless LAN Access Point with AP Manager utility.

Please install "Gigabyte AP Manager" in Windows by following the steps below.

Step 1:

Insert the Installation CD into your CD-ROM drive and click "Install

Gigabyte AP Manager".

Step 2:

Wait a moment as the Install Shield wizard starts.

Step 3:

Click "Next" to proceed through the wizard.

Chapter 3 Configuration - Using AP Manager

Table of Contents