Siemens SIMATIC NET S7-CPs Configuring And Installing page 195

8.2 Configuration
8.2.1 Procedure
Follow the steps below to send E−mails:
Clarify mail server mode:
S
Is there already a mail server in your network environment?
S
Who can set up access for the CP?
with Web
browser or
NCM Diagnostic
s
Check availability: Start/send a test mail
See Section 8.5
S Configure the E-mail connection
By configuring an E-mail connection you allow establishment of a connection
between the S7 CPU and the Advanced CP for sending E-mails.
S Check availability
You can check the availability of the E-mail function at any time by initiating a
test mail on the Advanced CP. For more detailed information, refer to Section
8.5.
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 07/2010
C79000−G8976−C182−10
Configure the E-mail connection
See Section 8.3
Send E-mails from the user program
See Section 8.4
Receive E−mail on receiving device
8 Sending Process Messages by E-Mail
with STEP 7 /
NetPro
Use FC
AG_SEND
/AG_LSEND
A−195