Table of Contents
Advertisement
5.4.1
Specifying the local connection endpoint
General Tab
This tab of the Properties dialog displays general connection parameters that
identify the local connection endpoint.
Figure 5-4
Layout of the "General" tab in the Properties dialog (ISO transport connections)
Attributes
Description
Local endpoint
ID
The entry is identical to the Local ID parameter in the connection
table.
Name
When you create the connection, a name is proposed here for the
connection endpoint along with a connection number as suffix.
With unspecified connections, use this box to identify the partner.
Via CP
If the station contains more than one Ethernet CP of the same type
connected to the same subnet, you can select the connection route.
−> "Route" button see Section 5.9. The same applies to CPs with 2
interfaces.
If no CP is assigned (for example because the CP was previously
deleted) "none" is displayed here.
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 07/2010
C79000−G8976−C182−10
5 Configuring Communication Connections
Access
Selectable
Modifiable
Display only
A−131
Advertisement
Table of Contents
