Timex International Warranty - Timex Stopwatch User Manual

Using the Countdown Timer
1. Press the MODE button until Tmr is displayed.
2. Press the START/LAP button to start the countdown timer.
3. Press the STOP/RESET button to pause the countdown timer.
4. When the countdown timer reaches zero, the alarm sounds for 60 seconds.
Press any button to stop the alarm.
Alarm Mode
Your stopwatch supports up to five alarms and has an hourly chime function.
The alarm sounds at the pre-set time each day for about 60 seconds. Press
any button to stop the alarm.
1. Press the MODE button until AL is displayed.
2. Press the STOP/RESET button to access the AL-1 settings.
3. Press the START/LAP button to turn on/off the Chime (audible alerts).
4. Press and hold the STOP/RESET button until Hours are flashing.
5. Press START/LAP to increase the number. Press and hold START/LAP to
increase at high speed.
6. Press the MODE button to change to the next selection (minutes).
7. Press START/LAP to increase the number. Press and hold START/LAP to
increase at high speed.
8. Press STOP/RESET to exit the set state.
9. Follow steps 2-8 to set Alarms 2, 3, 4 and 5.
Dual Time Mode
1. Press the MODE button until DT is displayed.
2. Press and hold STOP/RESET until Hours are flashing.
3. Press START/LAP to increase the number. Press and hold START/LAP to
increase at high speed.
4. Press the MODE button to change to the next selection (minutes).
5. Press START/LAP to increase the number. Press and hold START/LAP to
increase at high speed.
6. Press STOP/RESET to exit the set state.

TIMEX INTERNATIONAL WARRANTY

https://www.timex.com/productWarranty.html
©2023 Timex Group USA, Inc. TIMEX and INDIGLO are registered trademarks
of Timex Group and its subsidiaries.
2
ENGLISH 991-097372