Part Names And Basic Procedures; Basic Application Flow - Omron E5CC-800 User Manual

3 Part Names and Basic Procedures

3-1

Basic Application Flow

The following figure shows the basic flow for using the Digital Controller.
ON/OFF Control
Set the control hysteresis.
3 - 2
Power ON
Set the input type and other basic
settings.
• Input type
• Control method
• Alarm type
Other parameters
Set the set point.
Set the alarm set values.
Set the control periods* and PID constants.
Operate with the set values.
Refer to 3-4 Procedures after
Turning ON the Power Supply.
PID Control
*For time-proportional operation.
Digital Temperature Controllers (Simple Type) User's Manual (H211)