Onkyo TX-SR505 Instruction Manual page 77

■ Selecting Presets
1
To select a preset, use the PRE-
SET [
TUNING PRESET
remote controller's CH [+/–] but-
ton.
CH
DISC
ALBUM
■ Deleting Presets
1 Select the preset that you want to
delete.
See the previous section.
2
While holding down the [MEM-
ORY] button, press the
MEMORY TUNING MODE
[TUNING MODE] button.
The preset is deleted and its number
CLEAR
disappears from the display.
Parental Lock
You can lock out channels that you do not want to
receive.
1
Press the [SETUP] button.
SETUP
2
Use the Up and Down [
buttons to select "Parental Lock,"
and then press [ENTER].
"Lock : <0>" appears on the dis-
play.
]/[ ] buttons, or the
]/[
3
D TUN
1 2 3
VCR/DVR CBL/SAT
4 5 6
AUX MULTI CH DVD
7 8 9
TAPE TUNER C D
11 12
0
CLR
ENT
DIMMER SLEEP
4
5
6
SETUP
]
To unlock a previously locked channel, select the
locked channel (see step 4), press the Left and Right
[ ]/[ ] buttons so that the asterisk disappears (see step
5), and then press [ENTER]. The message "Unlocked"
will appear on the display.
Changing the PIN Number
1
SETUP
Press the [D TUN] button, and
then use the number buttons to
enter the PIN number.
Or
Use the Left and Right [
buttons to change the number
displayed between the angle
brackets < >, and then press
[ENTER]. Repeat this for each
digit in the PIN number.
Select the channel that you want
to lock out, for example:
Press the Left and Right [
buttons so that an asterisk
appears next to the name, as
shown below, and then press
[ENTER]:
The message "Locked" will appear on
the display.
Press the [SETUP] button.
Setup closes.
Press the [SETUP] button.
]/[ ]
]/[ ]
Asterisk
5