Inventory; Ptp-Sync Components - Motorola PTP-SYNC Installation Manual

1.

Inventory

PTP-SYNC components

PTP-SYNC installations require the following components:
PTP-SYNC
Motorola part number WB3665.
The kit contains: 1 x PTP-SYNC unit; 1 x M4 pan screw; 2 x M4 washers; 2 x M3 (6mm)
torx drive screws; 1 x lug for unit ground (cable not supplied); 1 x Cat5e cable (length
1 meter).
PTP800 CMU/PTP-SYNC 19inch Rack Mount Installation Kit
Motorola part number WB3486.
This is only required when the PTP-SYNC unit is mounted in a rack.
The kit contains: 1 x rack bracket; 8 x M3 washers; 8 x M3 screws; 1 x blank plate; 8 x
M5 nuts; 8 x M5 washers; 2 x rack handles.
Cat5e cable
This is only required if the 1 meter Cat5e cable supplied with the PTP-SYNC kit is not
long enough. It may be up to 2 meters long.
phn-1613_008v000 (Jun 2011)
PTP-SYNC Installation Guide
Page 5