MS-7697 Manboard
Mnmum tme nterval between the end of wrte data burst and the start of a column-
read command. It allows I/O gatng to overdrve sense amplfiers before read
command starts.
▶
tRFC0/ 1
These settngs determne the tme RFC0/1 takes to read from and wrte to a memory
cell.
▶
Advanced Channel 1/ 2 Tmng Configuraton
Press <Enter> to enter the sub-menu. And you can set the advanced memory tmng
for each channel.
▶
tRWTT0/ tWRRD/ tWRWR/ tRDRD
These tems s used to set the memory tmngs for memory channel 1/ 2.
▶
Bank Interleavng
Bank Interleavng s an mportant parameter for mprovng overclockng capablty of
memory. It allows system to access multple banks smultaneously.
▶
CPU Voltage/ CPU-NB Voltage/ DRAM Voltage
These tems are used to adjust the voltage of CPU, CPU-NB and memory.
▶
Overclockng profiles
Press <Enter> to enter the sub-menu.
▶
Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save
the current settngs, and you can to load the settngs from the stored profile.
▶
CPU Specficatons
Press <Enter> to enter the sub-menu. The submenu shows the nformaton of nstalled
CPU.
▶
CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the nstalled CPU
technologes. Read only.
▶
MEMORY-Z
Press <Enter> to enter the sub-menu.
▶
DIMM1,3 Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformatons of
nstalled memory.
▶
CPU Features
Press <Enter> to enter the sub-menu.
▶
AMD Cool'n'Quet
The Cool'n'Quet technology can effectvely and dynamcally lower CPU speed and
power consumpton.
Important
To ensure that Cool'n'Quet functon s actvated and wll be workng properly, t s
requred to double confirm that:
En-30