Additional Playback Functions; Next Selection: Preparing The Next Audio Track - Onkyo DV-C601 Instruction Manual

Additional Playback Functions

Next Selection: Preparing the next Audio Track

During playback of an audio CD, you can already prepare the next track that will be played as soon as the current one is finished. The
difference with direct selection of a track or disc is that playback of the prepared track starts only after the current track is finished (i.e. not
right away).
1
During playback of an audio CD, press the
NEXT
NEXT SELECTION button on the DV-C601
SELECTION
or the remote controller to activate this
function.
NEXT indicator
flashes
The NEXT indicator flashes and the disc num-
ber and track number disappear on the display.
2
Use the DISC 1 – 6 buttons (or DISC + and
DISC 1 DISC 2 DISC 3
DISC –) to select the disc that contains the
4 5 6
DISC DISC DISC
next track you want to listen to.
The number of the selected disc and the
"NEXT" indicator flash and the "AL" appears
on the display.
AL: means that all tracks will be played back.
If you wish to play all tracks of the selected
disc, press the NEXT SELECTION button
again to confirm the operation.
Skip to Step 3 to select the track number.
If you do not press the NEXT SELECTION but-
ton, the operation will be confirmed when the
number and the "NEXT" indicator stop flashing.
3
Select the track using the numeric buttons.
1 2 3
The number of the selected track lights up on
4 5 6
the display.
7 8 9
In that case, the display looks as follows:
+10 0
Notes:
• This function is only available for audio CDs (when the CD
indicator lights).
• You need to press one of these buttons within 8 seconds after
pressing NEXT SELECTION. Otherwise, the Next Selection
function will be cancelled. In that case, start again with step 1.
24
1 2 3
Numeric buttons
4 5 6
7 8 9
+10 0
DISC 1–6
REMOTE CONTROLLER
Tip:
• You can also use the DISC SKIP
1
Notes:
• The
• You can only prepare one track with Next Selection. See
• If you stop playback by pressing the
If you decide not to take advantage of the Next Selection function
after all, proceed as follows:
1. Press the NEXT SELECTION button.
2. Press the CLEAR button.
3. Press the NEXT SELECTION button again.
+ –
DISC /
NEXT
SELECTION
RC - 425 DV
to select the next disc.
Checking the next selection
Press the NEXT SELECTION button to
confirm your selection.
NEXT
The disc number flashes and the track
SELECTION
number lights up continuously. After a few
moments, the disc and track numbers of the
currently playing track reappear.
You can check the next selection by pressing
the NEXT SELECTION button.
As soon as the current track is finished, the
DVD Changer will play back the prepared
track (or disc if you selected "AL").
/ buttons are disabled while the Next Selection
function is activated. Pressing the DISC SKIP
DISC +/– buttons will cancel the Next Select function.
"Programming Memory Sequences" on page 22 for how to
prepare a series of tracks. Preparing yet another track before the
previously entered Next Selection command has been executed
overrides your first setting, so that only the second Next
Selection is carried out.
Selection function is cancelled.
Cancelling the Next Selection function
The disc numbers flash on the display.
The NEXT indicator goes dark and the function is cancelled.
CD
/ button on the DV-C601
/ buttons or
STOP button, the Next