JVC InteriArt LT-17D50BK Instructions Manual page 29

Setting Sharpness
• Using “ ” or “
• Press “ ” button to increase sharpness
level.
• Press “ ” button to decrease sharpness
level.
Setting Colour
• Using “ ” or “
• Press “ ” button to increase colour level.
• Press “ ” button to decrease colour level.
Setting Bright-2 (Only for 17D50BK)
Using“ ” or “ ” button select Bright-2.
• Press “ ” button to increase the back light.
• Press “ ” button to decrease the back light.
” button select Sharpness.
” button select Colour.
Setting Colour Temp.
• Using “ ” or “
Temp.
• Press “ ” or “ ” button to select “Warm”,
“Cool” or “Normal”.
Setting Noise Reduction
• Using “ ” or “
duction.
• Press “ ” or “ ” button to select Noise Re-
duction level “Off” or “Minimum” or “Me-
dium” or “Maximum”.
Note 1:
At low signal level, the changings on the Noise Reduction
function are not effective when there is menu on the
screen. If the menu is removed, the effect of this function
is seen. At normal broadcasting, Noise Reduction
changings are effective at once.
Note 2:
At moving pictures, while Noise Reduction is at maximum
level, some picture distortions may occur. If Noise Reduc-
tion is set to medium or minimum, the picture will improve.
Setting Hue
During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video
source is applied. Otherwise, HUE option is
invisible in Picture menu in TV mode :
• Using “ ” or “
• Press “ ” button to increase hue level.
• Press “ ” button to decrease hue level.
Center value is indicated with one arrow.
Reset
Press BLUE button to reset the picture
modes to factory default settings.
To Store the Settings
In the Picture Menu, all settings are stored
automatically.
- 28 -
” button select Colour
” button select Noise Re-
” button select Hue.