SONY
QUICK SETUP GUIDE
Controlling Tx manually
If your Tx is out of range of Crossremote, you can change parameters manually.
Power on the Tx whilst holding down the 'Set' button. This puts the unit into a 'soft start' mode where it does not
transmit, this can be seen by the lack of antenna logo on the display.
Once the parameter has been set, power cycle the Tx and the antenna logo should
reappear, meaning it is now transmitting.
K
DWX
Slot-In Bundle
Contact Karno Sound for 24hr support:
07747515123 | 07715103222 | 07952129649
Email : contact@karnosound.com
NAME
TX 2
+
POWER
-
SET
NAME
TX 2
6.