Garmin GSD 22 Installation Instructions Manual page 6

The following diagrams show the Garmin Marine Network with a GSD 22 connected.
Garmin GDL 0/0A
marine XM receiver
Garmin GPS 7
antenna
Serial cable
Ethernet cable
Transducer cable
xxxxxxxxx
Note: Every device connected to the Garmin Marine Network must be connected to the power supply for the boat. These diagrams show the
network connections; however, they do not show the power connections. Wire each device according to the appropriate installation instructions.
Note: These diagrams show the Garmin Marine Network connections; however, they do not show NMEA 2000 or NMEA 0183 connections.
GSD 22 Installation Instructions
The Garmin Marine Network with a Single Chartplotter and a GSD 22
Garmin marine radar
The Garmin Marine Network with Multiple Devices and a GSD 22
To transducer
xxxxxxxxxx
Garmin GMS 0 network
port expander
GSD 22 sounder
To transducer
GSD 22 sounder
xxxxxxxxxx