Limited Warranty - Campbell Hausfeld AT125102AJ Operating Instructions Manual

Sandblasting kits
Table of Contents

Advertisement

IN241900AV
TYPE OF
ABRASIVE
(SIEVE/SIZE)
Sand
General purpose use. Removing light rust and paint from metal, wood or other surfaces; wood
(20-40)
finishing; metal cleaning; glass and stone etching; hole drilling in glass; brick or cement block
cleaning; brass and silver cleaning; light brick cleaning; exterior automotive parts cleaning;
light stone and cement removal and water deposit removal.
Sand
Use for a fine polish finish or antique wood finish, brass and silver polishing, automotive parts
(50-100)
cleaning and polishing, sheet metal surface polishing, and fine glass etching.
Aluminum Oxide
Heavy rust removal and rough surface paint removal
Corn Cob Meal
Wood cleaning (fine)
Walnut or
Wood cleaning (coarse)
Pecan Shells
(Ground)
NOTE: Abrasive media that has not been cleaned and screened should be avoided, because the media could contain
material that will clog the gun.
1. DURATION: One year from the date of purchase by the original purchaser.
2. WHO GIVES THIS WARRANTY (WARRANTOR):
Campbell Hausfeld
The Scott Fetzer Company
100 Production Drive
Harrison, Ohio 45030
Telephone: (513) 367-4811
3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld product.
4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld portable air compressor, air tool or supplementary air accessory
supplied or manufactured by Warrantor.
5. WHAT IS COVERED UNDER THIS WARRANTY: Defects on material and workmanship which occur within the duration of the warranty period.
6. WHAT IS NOT COVERED UNDER THIS WARRANTY:
A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO ONE YEAR FROM THE DATE
OF ORIGINAL PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR
MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
C. Any failure that results from an accident, purchaser's abuse, neglect or failure to operate products in accordance with instructions provided in the owner's
manual(s) supplied with product.
D. Normal adjustments which are explained in the owner's manual(s) provided with the product.
E. Items or service that are normally required to maintain the product, i.e. lubricants.
7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor's option, products or components which have failed
within duration of the warranty period.
8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:
A. Deliver or ship the Campbell Hausfeld product or component to the nearest Campbell Hausfeld Authorized Service Center. Freight costs, if any, must
be borne by the purchaser.
B. Use reasonable care in the operation and maintenance of the products as described in the owner's manual(s).
9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY:
A. Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of
replacement parts.
B. If the purchaser does not receive satisfactory results from the Authorized Service Center, the purchaser should contact the Campbell Hausfeld Product
Service Department (see paragraph 2).
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
MODELS AT125102AJ, AT121002AJ AND AT121102AJ
Operation
APPLICATION

Limited Warranty

__
__
4
Printed in Taiwan

Advertisement

Table of Contents
loading

This manual is also suitable for:

At121002ajAt121102aj

Table of Contents