Installing smart card reader board
1. Insert the smart card reader board to align with the tabs on the chassis.
2. Replace the 2 (M2x3) screws to secure the smart card reader board to the system.
3. Connect the touchpad cable to its connector on the system board.
4. Affix the smart card reader board cable and connect the cable to the connector.
5. Install the:
a.
chassis frame
b.
WWAN card (optional)
c.
WLAN card
d.
SSD frame
e.
SSD card
f.
hard drive
g.
battery
h.
base cover
6. Follow the procedure in
Speaker
Removing the speaker
1. Follow the procedure in
34
Removing and installing components
After working inside your
Before working inside your
computer.
computer.