Table of Contents
Advertisement
Operation
Note: All functions of the unit can be operated by the control panel or remote
control.
1. Place the fan on a flat stable surface and plug into a power outlet.
2. Press the POWER button to turn the fan ON and press the same button to turn
the fan OFF.
3. There are 3 SPEED settings – Low, Medium and High. You can adjust the fan
speed by pressing the SPEED button.
4. Press the TIMER button the set the auto-off timer in 0.5 hour increments, up to a
maximum of 7.5 hours. The fan will turn off once the time has elapsed.
5. Press the MODE button to select either Normal, Natural or Sleep modes. Note:
The MODE display will change depending on the MODE selected. NL = Normal
mode, NT = Natural mode & SL = Sleep mode.
6. Press the OSC button to start/stop the left to right oscillation function.
7. Press the POWER button to turn the unit off.
Mode Description
Normal: When this mode is selected, the fan will operate as normal, in the settings
selected.
Natural: This mode changes from soft to a strong breeze to imitate natural wind.
Sleep: The fan speed will change from soft to strong in rhythmic cycles. The display
will indicate the mode selected.
10
Cleaning
Over time, dust can accumulate on the fan grille, which can affect the fans
performance. It is recommended to clean the fan at least once a month.
1. Turn the unit OFF and disconnect the appliance from the power supply.
2. Remove any dust build up with a soft brush.
3. Use a vacuum cleaner to remove dust and fluff from around the grille.
4. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used
for any stubborn marks.
5. Ensure the fan is dry before plugging it back into the power supply.
Do not use abrasive sponges, scouring pads, or a stiff brush to clean the unit.
IMPORTANT
The control panel and other parts must not come into contact with water or any
other liquids.
Storage
If not using the unit for an extended period of time, after cleaning please:
• Turn the unit off, unplug and take care of the mains lead & plug.
• Cover the unit and store it upright in a location where it will not receive direct sunlight.
NB- Prolonged exposure to direct sunlight will discolour the enclosure.
11
Advertisement
Table of Contents
