Installing The Chassis; Safety - Cisco Nexus 9408 Hardware Installation Manual

Installing the Chassis

•
•
•
•
•
•

Safety

Before you install, operate, or service the switch, see the Regulatory, Compliance, and Safety Information for
the Cisco Nexus 3000 and 9000 Series for important Safety Information.
Warning
Warning
Safety, on page 7
Preparing to Install the Chassis, on page 11
Unpacking and Inspecting the Chassis, on page 13
Installing the Chassis in a Four-Post Rack, on page 13
Grounding the Chassis, on page 18
Starting the Switch, on page 20
Statement 1071 Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Read the installation instructions before using, installing, or
connecting the system to the power source. Use the statement number provided at the end of each warning
statement to locate its translation in the translated safety warnings for this device.
SAVE THESE INSTRUCTIONS
Statement 1089 Instructed and Skilled Person Definitions
An instructed person is someone who has been instructed and trained by a skilled person and takes the necessary
precautions when working with equipment.
A skilled person or qualified personnel is someone who has training or experience in the equipment technology
and understands potential hazards when working with equipment.
C H A P T E R
Cisco Nexus 9408 NX-OS Mode Switch Hardware Installation Guide
3
7