Biostar INTEL B760 STANDARD Series User Manual page 25

Primary Display
This item selects which of IGFX/ PEG/ PCI Graphics device should be Primary Display or select SG
for Switchable Gfx.
GTT Size
This item select the GTT Size.
Aperture Size
This item selects Aperature Size.
» » Note : Above 4GB MMIO BIOS assignment is automatically enabled when selecting 2048MB aperture.
To use this feature, please disable CSM Support.
DVMT Pre-Allocated
This item selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal
Graphics Device.
DVMT Total Gfx Mem
This item selects DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.
PAVP Enable
This item enables or disables PAVP.
Max TOLUD
Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on
largest MMIO length of installed graphic controller.
VT-d
This item enables or disables VT-d capability.
Above 4GB MMIO BIOS assignment
This item enables or disables above 4GB Memory Mapped IO BIOS assignment. This is enabled
automatically when Aperture Size is set to 2048MB.
BIOS USER GUIDE
3. Chipset Menu | 25