Manpower / Assembly Time - Komatsu PC3000-6 Assembly Procedure

Assembly Procedure PC3000-6
ã
• Wear safety clothing, goggles, respirator and other safety
devices, whenever working conditions make this necessary.
• Provide hoists of sufficient capacity to lift heavy units. Refer to
the weight specifications.
• Be sure to observe the instructions in the "Assembly
Procedure Manual".
• Lifting gear, tools and other suspension systems must be in
good condition and of sufficient lifting capacity.
• Be sure hydraulic cylinders and attachment components are
properly supported from hoist and securely fastened, before
removing supporting pins.
• Floors must be clean and dry. After draining operations be sure
all spillage is cleaned up.
1.4

Manpower / Assembly Time*

Supervision
Assembly Time*
*Dependent on mine conditions (shifts, weather, ...)
**Without testing and customer acceptance.
AS PC3000-6 rev7
Edition October 2005
Customer
Dealer or
Komatsu Mining Germany
Days
6**
9
1 Electrician
4 Fitters/ Mechanics
1 Service Engineer