Epson Perfection 610 Scanner Scanner Basics page 20

7. When the scanner software installation is
complete, you see this screen:
Click . The Screen Calibration utility starts. You must calibrate your screen
Quit
and scanner to reproduce images closely matching the originals.
8. In the following window, move the slider to the right or left until the shades of the
horizontal gray stripes appear similar. View the screen from a short distance. The
gray stripes will not perfectly blend together; however, try to make the two tones
match as closely as possible.
before calibration
9. Click to register the calibration setting. Then restart your Macintosh.
OK
You will not need to change the screen calibration again as
long as you continue to use the same monitor. If you need
to recalibrate your screen at a later time, select Screen
Calibration in the EPSON Scanner folder.
10. Now you can install your creative software and view your electronic manuals as
described below.
after calibration
15