Epson Perfection 610 Scanner Scanner Basics page 17

4. Make sure only the
check box is selected, then click
.
Next
5. Click
Next
driver installation.
6. After the scanner software
installation is complete, the EPSON
Screen Calibration utility
automatically starts. You must
calibrate your screen and scanner to
reproduce images closely matching
the originals.
12
CD-ROM drive
to continue with the
You don't need to change the screen calibration again so long
as you continue to use the same monitor. If you need to
recalibrate your screen at a later time, click Scanners and
Cameras in the Control Panel. On the Devices tab, select
Scanner. Click Properties, then click the Calibration button.