Table of Contents
Advertisement
MOS INTEGRATED CIRCUIT HANDLING
Some North Star PC boards use some MOS-type IC's.
are identified as such in the instructions.
damaged by static electricity discharge, so special handling is
necessary to protect them.
possible and avoid touching the pins.
or tube which contains the MOS device onto the PC board before
removing the device from the foam or tube.
hands are touching the foam or tube when the device is removed
from the foam or tube.
Once an MOS device has been installed in a PC board, handle the
board as little as possible.
any IC while power is applied to the board, and never remove or
insert a PC board while power is applied to the motherboard.
Handle MOS devices as little as
Of course, never insert or remove
North Star 16K RAM Board
These parts
MOS devices can be
Place the conductive foam
Also, be sure both
8
Advertisement
Table of Contents
