Table of Contents
Advertisement
Features of your vehicle
Adjusting the mirror height
OON042512
The height of the rearview mirror can be
adjusted to suit your driving posture.
Change to optical mirror mode, adjust-
ing the rearview mirror angle by moving
it up and down.
Display settings (Digital mirror
mode)
OON042513
1. Press the menu button (1) The icons
will be displayed.
Icons
Select to adjust the brightness of
Select to adjust the display up/
2. Press the menu button (1) repeatedly
and select the item you want to
adjust.
3. Press the button (2) or button (3) to
change the setting.
The icons will disappear if the button
is not operated for approximately 5
seconds or more.
* If the brightness of the Digital Center
Mirror is set too high, it may cause eye
strain.
4
64
Settings
the display.
down.
Adjust the Digital Center Mirror to and
appropriate brightness. If your eyes
become tired, change to optical mirror
mode.
To prevent the light sensors from
malfunctioning
OON042514_2
To prevent the light sensors from mal-
functioning, do not touch or cover them.
Digital mirror mode operating
condition
The START/STOP button is in the ON
position. When the START/STOP button
is changed ignition switch LOCK/OFF or
ACC position, the image will be disap-
peared.
When using the Digital Center
Mirror in digital mirror mode
僅 When the liftgate is open, the Digital
Center Mirror image may not display
properly. Before driving, make sure
the liftgate is closed.
僅 If the display is difficult to see due to
reflected light, close the sunshade for
the sunroof. (if equipped)
僅 Any of the following conditions may
occur when driving in the dark, such
Mirrors
Advertisement
Chapters
Table of Contents
