Advertisement
12
5.2. Installation
Drill four holes for the screw anchors close to the four side hooks.
Hook the unit on the screw anchors in the ceiling with
Adjust the screws to make certain the fan coil is horizontally leveled.
Make certain there is enough space for maintenance and repair when installing
the unit. (see below drawing) any rise in the condensate drain piping.
Avoid slack on electrical connections.
Avoid disconnecting water connections after installation.
Avoid only partial insulation of the piping.
Avoid installation not correctly leveled which will cause condensate dripping.
Avoid flattening or kinking pipes or condensate pipes.
Note: The air duct used in site should match with the normal
Note: The air duct used in site should match with the normal
ESP of unit.
ESP of unit.
10 screw.
ceiling
Hide quick links:
Advertisement
