Installation; Before Installation; Assembly Parts - Miele PUR 98 D Manual

Before installation


Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.

Assembly parts

4 screws, 7 x 110 mm and
4 plugs, 10 x 80 mm
for securing the cooker hood to the
ceiling
The plugs meet European technical
requirements for use in concrete
ceilings.
They must only be used together
with the 7 x 110 mm screws
supplied. For other types of ceiling
construction, alternative fixings will
be required. Make sure the ceiling is
able to take the weight of the cooker
hood.
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode). Depending on the
model, the non-return flap may already
be fitted.
4 extension piece holders
for aligning and securing the telescopic
extension piece
4 screws M4 x 8.5 mm
for securing the extension piece
holders
14 screws M4 x 8 mm
for securing the spacer frame and
securing the cooker hood to the
installation frame
1 screw M4 x 16 mm
for securing the tower
DUI 32 conversion kit for
recirculation mode
(not supplied, available as an optional
accessory). The kit includes a
directional unit, aluminium hose and
hose clips.
Keep the following in a safe place:

Installation

27