Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275
Before You Begin
Removal Sequence
Product Description
Removing the Keyboard
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
Presario 1200 Series
Specifications
Troubleshooting
Pin Assignments
Parts Catalog
Battery Operations
Index
To remove the
keyboard,
complete the
following
steps:
1.
Prepare the
computer for
disassembly.
2. Remove
the
palmrest
cover with
touch
pad.
3. Turn the
keyboard
over, and
allow it to rest
on top of the
palmrest
cover with
touchpad slot
opening.
4. Remove
the
heatspreader
5. Disconnect
the flex cable
from the ZIF
connector on
the system
board.
To replace the
keyboard,
reverse the
previous
procedures.
Return to
Removal &
Replacement
Procedures
.