After you install your printer software, you can't run ScanDisk (Windows 95)
Possible cause
You cannot use
ScanDisk if Status
Monitor 2 is active.
You cannot print on a Windows NT 4.0 network
Possible cause
Your printer is not set
up correctly as a
remote printer.
Troubleshooting
Solution
Disable Status Monitor 2 whenever you want to run ScanDisk. See
Turning On Background Monitoring
Solution
You may need to use a different network path and printer port. Select a
different port in the printer's Properties windows and enter the new
network path to your printer at the DOS prompt. Then restart your
computer. See your Windows NT documentation for instructions on
changing the printer port and network path.
for details.
Page 174