XP-400 Small-in-One
Start Here
Read these instructions before using your product.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials, including from inside the printer.
2
Turn on and adjust
1
R aise the paper support, then connect the power cord to
the back of the printer and to an electrical outlet.
Caution: Do not connect to your computer yet.
2
Raise the control panel, then press the
N ote:
If you want to lower the control panel, squeeze the release
bar underneath.
C
aution: Do not lower the control panel without first squeezing the
release bar underneath or you may damage the product.
*412343800*
*412343800*
Printer
™
power button.
3
T o select English as your language, press OK.
I f you want to change the language, press
press OK.
Note: You can change the language later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink cartridges
Note: Don't load paper yet.
1
L ift up the scanner unit, and wait until the ink cartridge
holder stops moving.
2
S hake the ink cartridges gently 4 or 5 times, then
unpack them.
3
Remove only the yellow tape from each cartridge.
C
aution: Don't remove any other seals or the cartridges may leak.
4
I nsert the cartridges in the holder for each color, and press
each cartridge down until it clicks.
or
to select it, then