Install Ink Cartridges - Epson Stylus CX9400Fax Series Start Here Manual

4

Install ink cartridges

Note: Don't load paper before installing the ink cartridges.
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges,
then unpack them.
4
Remove only the yellow tape from each cartridge.
Caution: Don't remove any other seals from the cartridges.
5
Insert the cartridges in the
holder for each color.
6
Press the cartridges down until they click.
7
Close the ink cartridge cover and press it
down until it clicks.
8
Close the scanner.
9
Press the OK button to
charge ink. Charging
takes about 2 minutes.
Caution: Don't turn off
the CX9400Fax Series
while the ink system
is initializing or you'll
waste ink.