Using The Security Lock - Epson Stylus CX6400 Quick Reference

Using the Security Lock

If you want to prevent unauthorized use of your CX6400, you can activate its
security lock feature. The security lock requires you to enter a PIN (Personal
Identification Number) whenever you turn on the CX6400. If you forget your
PIN code, you can still regain access to your CX6400 (see page 9).
To enable the security lock, you must first run the Security Lock program on a
computer connected to the CX6400.
Follow these steps to activate the security lock:
1. Press the button until the green lights flash to turn on your CX6400.
On
Press and hold to
turn on the CX6400
2. Insert your Stylus CX6400 software CD-ROM.
3. Windows: If you see the Software Installation screen, click
SecurityLock Tool
file located in that folder.
Macintosh: The EPSON folder automatically opens (if it doesn't, double-
click the EPSON CD-ROM icon). Then double-click the
icon.
You see this screen:
Note:
You can also copy the program to
your system by dragging its icon
from the CD-ROM onto your hard
drive.
folder on your CD-ROM, then double-click the program
. Open the
Exit
Security Lock
Using the Security Lock
7