Scanning To A Card - Epson Stylus CX6400 Quick Reference

Scanning to a Card

Follow these steps to scan an image to a memory card and save it in JPEG format:
1. Make sure your CX6400 is not connected to your computer (or your
computer is turned off ), then insert a memory card (see page 21).
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the screen to format the card. Any data stored on the card
will be erased.
2. Press the
3. Press the green button next to the LCD screen until
then press
Note:
You can also scan to your computer or create an e-mail with the scanned image
attached. Select either To PC or To E-mail, then see your online Reference Guide
for details.
4. Select the document type (
Graphic
5. Select
Auto
of your document are light in color, the
CX6400 may not be able to detect them
and part of your image may be cut off; in
that case, select
area.)
6. For ordinary documents, select
the quality of the scanned image. For
higher quality, select either
or
Graphic
Note:
Higher-quality images take up more memory
card space.
7. Press the button next to
32
Scanning to a Card
button to enter Scan Mode.
Scan
.
OK
).
as the scan area. (If the edges
to scan the entire
Max.
(for photos).
OK
or
Text
Document type
as
Normal
(for text)
Fine
(shown on the LCD screen).
To Photo Card
Image quality
appears,
Scan area