Creative AIRWAVE HD MF8165 Quick Start Guide

Overview

Top

1. Microphone
2. OFF/ON Power
3. Volume controls
4. Multifunction button
5. LED Indicator

Back

5. NFC Receptor
6. USB port
7. Bass port
8. Aux-In

Pair it

NFC Pairing

1. Power on the speaker by sliding the switch from OFF to ON position.
2. Tap your NFC-enabled smart device on the back of the Airwave HD and they're paired.

Did you know?
With Multipoint, you can connect up to two smart devices with your Airwave HD simultaneously. Simply pause playback on your current device and tap another NFC device to connect!

Manual Pairing

1. Power on the speaker by sliding the switch from the OFF to ON position.
2. Press and hold the Multifunction button until the LED indicator starts blinking white rapidly.
3. Select the Airwave HD from the list of discovered Bluetooth devices and they're paired!

Use it

Play Music

Tip
Share your music out loud with more than one connected device using Multipoint.
Simply pause your music and play from the other without disconnecting.

Take Calls / Reject Calls

Press the Multifunction button to pick up an incoming call
OR
Press and hold the Multifunction button for 2 seconds and release to reject an incoming call

Useful information

© 2013 Creative Technology Ltd. All rights reserved. Creative and the Creative Logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth^® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. aptX is a trademark of CSR plc. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual contents may differ slightly from those pictured. Use of this product is subject to a limited warranty.