Advertisement
Quick Links
TP-Link Archer AX53 and AX55
Get to know your router!
Backpanel
WPS/Wifi-button
Press to activate WPS.
Press and hold for more
than 2 sec to turn wifi on/off.
WPS/Wi-Fi
Reset
Reset-button
Resets router to
Power
Power On/Off
default factory
settings.
After a reset, the
router needs to be
re-installed.
This router can be mounted on a wall or placed on a shelf/desk.
Router
USB 2.0 port
(not available on
AX53)
connect USB-devices.
WAN
Internet-port
Connect to fiberconverter/
Reset
cablemodem using at least a
1m long ethernetcable.
Ethernet-ports
Connect a computer or
other devices to your
router.
Connect power-
adapter here
(12V/1,5A).
LAN1
LAN2
LAN3
LAN4
Power
On/off-
button
Turns the
router on/off.
Advertisement
Related Manuals for TP-Link Archer AX53
Summary of Contents for TP-Link Archer AX53
- Page 1 TP-Link Archer AX53 and AX55 Router Get to know your router! Backpanel WPS/Wifi-button Ethernet-ports Press to activate WPS. Connect a computer or Press and hold for more other devices to your than 2 sec to turn wifi on/off. router. USB 2.0 port...
- Page 2 TP-Link Archer AX53 and AX55 Troubleshooting Troubleshoot using lights On our router there are six lights. If you’re experiencing problems the lights are a good place to start your troubleshooting. When the router has power and access to internet the lights might look like the image above.
- Page 3 TP-Link Archer AX53 and AX55 Connect our router At Lyssna-Njut Fibernät AB you can choose to buy your router with basic configuration, ready to use right away. Without the basic installation the router must be installed and updated before you can use it (read more at tp-link.com).
- Page 4 TP-Link Archer AX53 and AX55 WPS-connection Connect using WPS WPS easily connects devices to your router (WPS does not work with iOS-devices). To connect devices with WPS to your router, press the WPS button. The POWER-light is blinking when connection is in progress.