Sony Betacam SX DNW-A100 Maintenance Manual page 146

4-2. TAPE Maintenance Mode (M0)
4-2-1. Overviews
A2 : AUDIO/VIDEO ADJUST
This submode is used to adjust the audio and video systems.
For more details, refer to Section 4-2-9 (on page 4-59).
AUDIO/VIDEO ADJUST MODE
*
A20:VPR VR
A21:AD VR
A22:AD VR (LOOP)
A23:CP VR
A2F:NV-RAM CONTROL
DNW with BKNW-104
Title
A20 : VPR VR
A21 : AD VR
A22 : AD VR (LOOP)
A23 : CP VR
A231 : SDI ENC VCO
A232 : SDI DEC VCO
A233 : SDTI ENC VCO
A234 : SDTI DEC VCO
A24 : INPUT CF DETECT
A25 : DEC VR
A26 : DEC VR (LOOP)
A2F : NV-RAM CONTROL
4-12
AUDIO/VIDEO ADJUST MODE
*
A20:VPR VR
A23:CP VR
A24:INPUT CF DETECT
A25:DEC VR
A26:DEC VR (LOOP)
A2F:NV-RAM CONTROL
DNW with BKDW-505/506
Page Description
4-60 Adjusts the reference signal system and analog video output system
on the VPR-17 board.
4-61 Adjusts the analog component video input system.
(Used for BKNW-104.)
4-61 Adjusts the analog component video input system (in the multi-loop
state). (Used for BKNW-104.)
4-62 Adjustment menu for the SDI and SDTI input/output interfaces
4-62 Automatically adjusts the SDI output interface.
4-62 Automatically adjusts the SDI input interface.
4-62 Automatically adjusts the SDTI output interface.
(Used exclusively for DNW-A100/A100P.)
4-62 Sets to the adjustment mode for SDTI input interface.
(Used for BKNW-103.) (Used exclusively for DNW-A100/A100P.)
4-64 Automatically adjusts the color frame detection timing of a composite
video input. (Used for BKDW-505/506.)
4-66 Adjusts the composite video input system.
(Used for BKDW-505/506.)
4-66 Adjusts the composite video input (in the multi-loop state).
(Used for BKDW-505/506.)
4-67 Saves the adjustment data in audio and video systems.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P