Battery Conservation Settings and
Procedures
Using the following battery conservation settings and procedures
extends the run time of a battery pack:
■
Turn off wireless and local area network (LAN) connections
and exit modem applications when you are not using them.
■
Do not leave your notebook connected to AC power for
extended periods of time.
■
Disconnect from the notebook any external devices that use
power from the notebook. Battery run time is not affected by
external devices that are plugged into an external power
source.
■
Stop or remove a PC Card you are not using. For more
information, refer to
■
Disable or remove a digital memory card (SD Memory Card,
SDIO Card, MultiMediaCard, Memory Stick, Memory Stick
Pro, xD Picture Card, or SmartMedia) you are not using.
■
Lower screen brightness.
■
Lower system volume.
■
Turn off a device connected to the S-Video jack.
■
If you leave your work, initiate Standby or Hibernation or
shut down the notebook.
■
Select a short wait time, 5 minutes or less, for the monitor
timeout. To change monitor timeout settings, select Start >
Control Panel > Performance and Maintenance >
Power Options > Power Meter tab. Select a short wait time
from the Turn Off Monitor list, and then select OK.
Hardware and Software Guide
"Using a PC Card"
in
Chapter 6.
Power
3–25