Optional Terminal Modules; The Scps And Terminal Module Connections - HP E1419A User Manual

Optional Terminal Modules

The SCPs and
Terminal Module
Connections
Note
28 Field Wiring
The HP E1419A Option 11 Terminal Module has screw type terminal
blocks. The HP E1419A Option 12 Terminal Module has spring clamp type
terminal blocks. Both of these Terminal Modules provide:
•
Terminal block connections to field wiring.
•
Strain relief for the wiring bundle.
•
Reference junction temperature sensing for thermocouple
measurements.
The HP E1419A Option A3F Terminal Module is available to interface the
HP E1419A to an HP E1586A rack mount terminal panel (see Page 44).
The same Terminal is used for all field wiring regardless of which Signal
Conditioning Plug-on (SCP) is used. Each SCP includes a set of labels to
map that SCP's channels to the Terminal Module's terminal blocks. See
step 4 in "Installing Signal Conditioning Plug-ons" in Chapter 1 page 18 for
HP E1419 Terminal Modules.
The SCPs HP E1531 through HP E1537 do not include wiring labels for the
Option 11 terminal module. For these SCPs use the connection tables in the
SCP's manual along with the Option 11 wiring map on page 42.
Chapter 2