Table of Contents
Advertisement
12.19 REMOVAL AND INSTALLATION OF THE
BUCKET
Park the machine on level ground, set the safety bar on the
frame, ground the bucket, shut down the engine, apply the
parking brake and place blocks under the tires.
Remove or install the bucket in the following manner, if so
required for the convenience of transportation.
REMOVING THE BUCKET
1. Loosen retainer mounting bolts on the bucket link pin part and
the bucket pin part, then remove retainer 1 and shim 2.
2. Loosen lock bolt 3 and remove cam 4.
WARNING
12. OPERATION
2-95
Advertisement
Table of Contents
