Elastometric Interface Material; Glove Material And Assembly; Sock Bootie Material; Physical Foot Protection - KAPPLER DuraChem 500 User Information

Elastomeric Interface Material
The interface material is fire retardant butyl.

Glove Material and Assembly

The glove assembly consists of two layers:
Inner glove: Guardian 25 mil butyl
●
Outer glove: Nomex®/leather glove
●
These gloves are unlined and have no surface treatments applied.

Sock Bootie Material

The garment is made with an integrated sock bootie of DuraChem
The user must wear separate outer safety boots.

Physical Foot Protection

The OnGuard HazMax #87012 or Tingley #82330 boot must be worn over the
integrated bootie for compliance to NFPA 1990 (1994) - 2022.
The OnGuard HazMax #87012 is one piece injection molded with anti-slip resis-
tance and steel toe, steel shank and steel midsole. Polyester lining. Men sizes
6-15. Green.
The Tingley Hazproof #82330 is one piece injection molded with anti-slip resis-
tance and steel toe, steel shank and steel midsole. No linings or surface treat-
ments. Men sizes 7-13. Orange.
www.kappler.com
User Information for DuraChem® 500
18
500 material.
®