Table of Contents
Advertisement
User Information for DuraChem® 500
7
INSPECTION OF THE GARMENT
caution
The garment should undergo a full visual inspection at the
following times:
Upon receipt to ensure no damage has occurred
●
during shipment, OR prior to first donning of garment.
After a garment is worn and before the garment is
●
made available for reuse.
Annually. However, most performance properties of a
●
vapor-protective ensemble cannot be tested by the user in
the field.
FULL VISUAL INSPECTION
To perform a full visual inspection:
Choose a clean, dry area that is free of potential sources of snags,
●
tears and punctures.
Mark suspected defects with colored adhesive tape.
●
Visually inspect seams for tape lift or de-lamination.
●
Visually inspect for surface damage or discoloration on material,
●
visor, gloves and closure.
Check zipper closure for worn or damaged parts. Run your fingers
●
along the zipper length to feel for imperfections or separations.
www.kappler.com
Advertisement
Table of Contents
