Formatting The Recorder [Format] - Olympus LS-10 Instructions Manual

Formatting the Recorder [Format]

If you format the recorder, all files will be removed
and all function settings will return to defaults
except date and time settings. Transfer any
important files to a computer before formatting
the recorder.
2 3 button
9 0 button
`/OK button
MENU button
1
While the recorder is during stop
mode, press the MENU button.
• The menu will appear on the display. You
can also change to [Memory Menu] screen
by using the settings tab (☞ P.34).
2
Press the 2 or 3 button to select
[Format].
3
Press the `/OK or 9 button.
[Format] will appear
on the display
4
Press the 2 or 3 button to select the
recording media to format.
• When formatting an SD Card, cancel the
write protection function before inserting
the card into the recorder (☞ P.15).
5
Press the `/OK button.
6
Press the 2 button to select [Start].
7
Press the `/OK button.
• After the [Data Will Be Cleared] message
is on for two seconds, [Cancel] will turn
on.
8
Press the 2 button again to select
[Start].
[Cancel] will appear
on the display
4
43