Hints And Tips - Electrolux LHR3233CK User Manual

5.7 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other symbols
on the control panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press
comes on. The heat setting is lowered to
1.
2. To deactivate the function: press
The previous heat setting comes on.
5.8 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
5.9 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with . Do not set any heat setting. Touch

6. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
6.1 Cookware
• The bottom of the cookware must be as
thick and flat as possible.
• Ensure pan bases are clean and dry
before placing on the hob surface.
76 ENGLISH
for 4 seconds.
the hob with
To deactivate the function: activate the hob
with
for 4 seconds.
the hob with
To override the function for only one
.
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can
.
operate the hob. When you deactivate the
hob with
5.10 OffSound Control (Deactivation
and activation of the sounds)
Deactivate the hob. Touch
The display comes on and goes out. Touch
for 3 seconds.
.
of the front left zone to choose one of the
following:
. The
•
•
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to
the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
• In order to avoid scratches, do not slide or
rub the pot across the ceramic glass.
Cookware made of enamelled steel and
with aluminium or copper bottoms can
cause a colour change on the glass-
ceramic surface.
comes on. Deactivate
.
. Do not set any heat setting. Touch
comes on. Deactivate
.
for 4 seconds. Set the
the function operates again.
or
- the sounds are off
- the sounds are on
.
for 3 seconds.
comes on. Touch
you can hear