Taking Sequential Shots (Sequence Mode) - Olympus CAMEDIA C-2040 Zoom Instructions Manual

Taking sequential shots (Sequence mode)

Use this mode to take a sequence of continuous shots. The camera sequen-
tial shooting for as long as you hold down the shutter button. Sequential
shooting stops when you release the shutter button.
P A/S/M
1
Press the
The menu screen appears.
2
Use or
pad to select "DRIVE" and
then press
3
Press or
" " (sequential shooting)
or " " (AF sequential
AF
shooting) and then press
the [OK] button.
The " " appears on the
control panel.
When you
(sequential
focus, brightness (exposure)
and white balance are fixed at
the first frame.
When you select "
sequential shooting), the focus,
brightness
white balance are measured
and updated for each frame.
Consequently, the sequential
shooting rate is slower in this
mode.
You cannot select this mode
when TIFF is specified as
Recording
Recording mode setting. (P.111)
You can still take pictures at
this point.
(Menu) button.
on the Arrow
.
to select
select " "
shooting), the
AF
" (AF
(exposure) and
mode. Change
2 3
1
P F2.0 1/800 0.0
AF/MF
DRIVE
WB
AF
ISO
BKT
[ 1 / 3
Control panel
Sequence mode (sequential shooting)
P
3
1.0 3
]
113
4