Setting The Siren Mode - Furuno LH-5000 Operator's Manual

LH-5000 Operator's Manual

2.14 Setting the Siren Mode

The LH-5000 in the siren mode sounds the warning signal such as YELP through
both horn speakers, alerting nearby vessels of your presence and status. To
interrupt the warning signal, press and hold the PTT key on the microphone and
speak into it.
You can communicate with intercom speakers in the siren mode by choosing the
specific one.
Step 1 Press the MENU key on the front panel.
Step 2 Press the Up or Down key to select "SIREN" and press the ENT key.
Step 3 Press the Up or Down key to select "YELP", "HORN" or "OFF" and press
the ENT key.
YELP: The LH-5000 sounds the yelp warning signal (cyclic sound at 250
~ 500 Hz).
HORN: The LH-5000 sounds the horn warning signal (continuous sound
at 520 Hz).
OFF: The LH-5000 does not sound the warning signal.
Talking with a specific intercom speaker in the siren mode
Step 1 Press any key from IC 1 to IC 6 on the front panel.
35
Operation Overview