LH-5000 Operator's Manual
For flush mounting
Step 1 Determine the position of installation holes according to the marking
template and drill the hole.
Step 2 Pry off the frame from the front panel.
Step 3 Paste the cushion on the back of the front panel by the double-side
tape on the cushion.
Step 4 Place the intercom speaker in the hole and fix it with four screws.
Step 5 Connect the intercom speaker to the loud hailer using the color-coded
signal cable.
Make sure that every signal cable is firmly connected.
Step 6 Mount the frame.
10
Installation