Beko BBVM13400XDS User Manual page 23

Illustration 1: If the cross-partition sheet is
inserted:
Illustration 2: If the cross-partition sheet is
not inserted:
3. When the cross-partition sheet is inser-
ted, the lower section cooking area
screen is activated. Just tap
select the upper section.
ð The
symbol appears next to the
function screen belonging to the
upper section.
4. When the cooking section you want to
cook is active, select the function you
want to cook with the function selection
button.
5. The pre-set temperature for the operat-
ing function you selected appears on
the display. Set the temperature you
want to cook with the temperature knob
if you would like to change this temper-
ature.
6. If you want to cook without setting
the cooking time, tap
cooking.
key to
ð Your oven starts operating immedi-
7. If you want to cook by setting the
cooking time tap
ð The
Illustration 3: For single large section:
EN / 23
If you change the operating func-
tion after you change the pre-set
temperature of the operating func-
tion, the last temperature set is
shown on the display. However, if
the selected temperature is not
within the temperature range of the
selected operating function, the
highest temperature for that operat-
ing function is displayed.
If the cooking is started without ad-
justing the cooking time, the oven
does not automatically turn itself
off at the end of cooking. The user
must end the cooking.
ately at the selected function and
temperature and the time passed
appears on the display. On the dis-
play, the and symbols are
shown. As the oven inner temper-
ature reaches the set temperature,
each stage of the
light up. The time passed after
cooking is started appears on the
Duration/hour screen.
key once.
symbol appears on the dis-
play.
EN
PL
key to start
symbol will