JVC LT-32FA120 Operating Instructions Manual page 182

5. Repeatedly press
· The Channels menu is shown.
6. If the option [Satellite add] is greyed out, please do the followings to enable this option :
Select Satellite re-scan and then press OK.
·
If you currently have only 1 satellite installed, select More > Tone Burst
·
· Select the second line for instance Eutelsat 7E, then press OK to access the submenu and set
to "On" [Satellite Status] in order to select the desired satellite in the submenu of [Satellite
selection]. Once the satellite is selected, set back [ Satellite Status] to "Off".
7. Go back to the Channels menu and the [Satellite add] option is enabled.
8. Repeatedly press
9. Follow the on-screen instructions to add a satellite.
on the remote control to select [Channel] and press
on the remote control to select [Satellite add] and press
180
OK
.
OK
.