Sanyo MINI ECO-i XHX1252 Service Manual & Test Run Service Manual page 43

3. Timer Remote Controller (RCS-TM80BG)
4. In the (program step 3) setting, set the program
pattern.
There are 4 program patterns.
Pressing / repeats the following display patterns.
pattern 1
The indoor unit starts operation at the programmed
time.
pattern 2
The indoor unit stops operation at the programmed
time.
pattern 3
The indoor unit starts operation at the programmed
time and changes the temperature settings.
Press / to change the temperature setting.
pattern 4
The indoor unit changes the temperature setting at
the programmed time.
Press / to change the temperature setting.
Select the program pattern and press
Note
If you press during the setting, it returns to the program confirmation mode.
If there is no operation made for 3 minutes during the setting, it returns to the normal mode.
In this case, all the settings in progress will be invalid.
. The program timer setting is confirmed and the unit enters the confirmation mode
2-25
Remote Control Functions
pattern 1
pattern 2
pattern 3
pattern 4
2
.