Sanyo MINI ECO-i XHX1252 Service Manual & Test Run Service Manual page 131

6. Communication Adaptor (SHA-KA128AAB)
Read the following instructions carefully, and carry out secure installation and electrical work.
The precautions given in this manual consist of specific "Warnings" and "Cautions". They provide important safety-related information. Be
sure to strictly observe all safety procedures. The labels and their meanings are as described below.
Warning
Caution
* After installation is completed, perform a test run to check for operating trouble. Explain operating procedures to the customer following the
central control device Operation Manual and then request the customer to store this Instructions for the Electrical Installer together with the
central control device Operation Manual.
Be sure to arrange installation by the dealer where the system was purchased or by a professional installer. Electric shock or fire may result
if an inexperienced person performs any installation or wiring procedures incorrectly.
Be sure that this unit is securely installed in accordance with this Instructions for the Electrical Installer. Electric shock or fire may result if
any installation or wiring procedures are incorrectly performed.
Only a qualified electrician should attempt to connect this system, in accordance with the instructions in this manual. Use a dedicated
electrical circuit. Insufficient electrical circuit capacity or incorrect installation may cause electric shock and fire.
Use the specified cables for the electrical connections, and connect the cables securely. Run and fasten the cables securely so that
external forces or pressure placed on the cables will not be transmitted to the connection terminals. Overheating or fire may result if
connections or attachments are not secure.
Depending on the installation conditions and location, an earth leakage breaker may be required. If an earth-leakage breaker is not
installed, there is a danger of electric shock or fire.
Ground yourself to discharge static electricity before performing any wiring.
For your safety
This symbol refers to a hazard or unsafe procedure or practice that can result in severe personal injury or
death.
This symbol refers to a hazard or unsafe procedure or practice that can result in personal injury or product or
property damage.
Warning
Caution
2-113
Remote Control Functions
85464369003000
2