Combined Print Mode Command (Epson) - Oki MICROLINE ML521 Reference Manual

Character Pitch Settings for Calculated H
The setting made using the H
parameter is set to 02 hexadecimal.
Parameter f
a
Parameter f is used to engage proportional spacing.
a
f = 02 hexadecimal (2 decimal): engage proportional spacing
a
f = 00 hexadecimal (0 decimal):use character pitch set by parameters H
a

Combined Print Mode Command (Epson)

ML320 E/I, ML321 E/I
Function
Select Print Features
This command lets you use any combination of the features listed in the table below. The value
of n can range from 0 to 255. To determine the value of n, add up the values for all the features
you wish to use. To turn off all these features and return to 10 cpi printing, substitute 0 for n.
34
Hex Value Character Pitch
00 Command invalid
90 10 cpi
78 12 cpi
60 15 cpi
54 17 cpi
48 20 cpi
and L parameters will automatically be overridden if the fa
fwd fwd
ML320 Turbo, ML321 Turbo
ML390 Turbo, ML391 Turbo
ASCII Decimal
ESC ! n 27 33 n
Chapter 4: Character Style Commands
, L
fwd fwd
Hexadecimal
1B 21 n
Values
and L .
fwd fwd
ML520, ML521
ML590, ML591